Points to note when installing and using nylon pipes
- Classification:Industry News
- Release Time:2021-01-19 16:01
(Summary description)The nylon tube is easy to process, stable in size, low in permeability, high in resistance, long in service life, and good in heat resistance. It can be used to transport compressed air, water, fuel oil, chemical solvents, liquid food, etc. Therefore, the use range of nylon tube is very wide.
Points to note when installing and using nylon pipes
(Summary description)The nylon tube is easy to process, stable in size, low in permeability, high in resistance, long in service life, and good in heat resistance. It can be used to transport compressed air, water, fuel oil, chemical solvents, liquid food, etc. Therefore, the use range of nylon tube is very wide.
- Classification:Industry News
- Release Time:2021-01-19 16:01
- Views:
The nylon tube is easy to process, stable in size, low in permeability, high in resistance, long in service life, and good in heat resistance. It can be used to transport compressed air, water, fuel oil, chemical solvents, liquid food, etc. Therefore, the use range of nylon tube is very wide.
Precautions when installing and using nylon tubing:
When using nylon tubing, if the working environment temperature is too high, it may affect the working pressure and even damage the nylon tubing. Do not apply tension or twisting force on the nylon tube, otherwise the nylon tube may break or be damaged. Use heat-resistant water pipes to hold water or heat medium oil, otherwise it may age and cause cracks. Do not rub against each other or twist the nylon tube, otherwise it may cause the nylon tube to break. Use above a smaller bending radius. Sufficient margin should be left to allow the length of the pipeline.
If the nylon tube is filled with water, use an intubation tube. If the sleeve is not used, the nylon tube may fall off. If there is chemical gas in the environment where the nylon tube is used, it may cause the nylon tube to rupture. When installing the nylon tube on the quick plug, the cross section of the nylon tube should be vertical, and there should be no scratches on the outer circumference.
Nylon pipe drilling: Use a drill with an outer diameter less than or equal to 1/3 of the rod diameter, the drilling angle is 90-110°, and the speed is less than 400r/min. The drill must be withdrawn in time and cooled with water or saponified oil, and then continue drilling or reaming in accordance with the above operating procedures.
The above are the main points that we need to pay attention to in the installation and use of the nylon tube, because if you do not pay attention to these points, it may cause damage and rupture of the nylon tube, and cause great safety hazards. I hope that the content we explain to you will be helpful to everyone. If you want to know more, you can follow our official website, we will continue to update it.
Scan the QR code to read on your phone
Related Reading
- Mobile Site